*Note: There are 21 grams per cubic inch of Silicone Rubber.*

There are 453 grams in 1lb.

**Formula for a Square/Rectangle Mold:**
Length x Width x Height

**Example:** You have a mold box that needs to be filled up 9" x 4" x 2" = 72 cubic inches in order to completly cover your original/part.

Now using the same formula subtract the cubic inches (volume) of your part.

**Example:** Your part is 8" x 3.5" x 1.5" = 42 cubic inches.

Then you would take 72 - 42 to give you a total of 30 cubic inches.

30 cubic inches x 21 grams per cubic inch = 630 grams of RTV needed.

And then if you want to calculate that into lbs. take 630 divided by 453 grams per lb. = 1.39 lbs. of RTV.

**Formula for a Round Mold:** Pi x Radius (squared) x Height

**Example:** The diameter of a mold is 4" (the radius would then be half of that being 2") and the height is 3".

**So this is what it would look like:**

2" x 2" (radius squared) x 3.14 (pi) x 3 (height) = 37.68 cubic inches.

Now using the same formula subtract the cubic inches of your part.

**Example:** The part is 3.5" diameter (1.75" radius) by 2.75" high.

**So this is what it would look like:**

1.75" x 1.75" (radius squared) x 3.14 (pi) x 2.75" (height) = 26.45 cubic inches.

Then you would take 37.68 - 26.45 to give you a total of 11.23 cubic inches.

11.23 cubic inches x 21 grams per cubic inch = 236 grams of RTV needed.

And then if you want to calculate that into lbs. take 236 divided by 453 grams per lb. = .52 lbs. of RTV.

*Note: There is .554 ounces in 1 cubic inch of Alumilite Resin.*

**Formula for a Square/Rectangular Piece:** Length x Width x Height

**Example:** If your piece is 3" x 4" x 2" = 24 cubic inches. Take 24 cubic inches x .554 ounces per cubic inch = 13.25 ounces.

**Formula for a Round Piece:** Pi x Radius (squared) x Height.

Use the same formula as the RTV round mold (section 1) to calculate resin needed. Then multiply that by .554 ounces per cubic inch to determine ounces needed. top

Ecommerce software by AmeriCommerce